Armstrong Glue Down Vinyl Plank Flooring Installation Instructions

Armstrong glue down vinyl plank flooring is a durable and stylish flooring option that is easy to install. With a few simple tools and some basic knowledge, you can install Armstrong glue down vinyl plank flooring yourself. Here are the essential aspects of Armstrong glue down vinyl plank flooring installation instructions. So, let's get started!

Tools You'll Need:

Tape measure
Utility knife
Trowel
Notched trowel
Rubber mallet
Pry bar
Safety glasses
Dust mask

Materials You'll Need:

Armstrong glue down vinyl plank flooring
Armstrong vinyl plank flooring adhesive
Underlayment (optional)

Preparing the Subfloor:

Before you start installing your Armstrong glue down vinyl plank flooring, you need to prepare the subfloor. The subfloor should be smooth, level, and dry.

If the subfloor is not level, you will need to level it using a self-leveling compound.
If the subfloor is not smooth, you will need to sand it until it is smooth.
If the subfloor is not dry, you will need to let it dry completely before installing the flooring.

Installing the Underlayment (Optional):

If you are installing your Armstrong glue down vinyl plank flooring over a concrete subfloor, you will need to install an underlayment. The underlayment will help to protect the flooring from moisture and will also provide a cushion for the flooring.

Roll out the underlayment over the subfloor.
Tape the seams of the underlayment together.

Installing the Armstrong Glue Down Vinyl Plank Flooring:

Start by measuring the room and determining the starting point for the flooring. The starting point should be in the center of the room.
Apply a thin layer of Armstrong vinyl plank flooring adhesive to the subfloor using a trowel.
Place the first plank of flooring in the starting point.
Use a rubber mallet to tap the plank into place.
Continue installing the planks, working your way out from the starting point.
Make sure to stagger the joints between the planks.
Once all of the planks are installed, use a pry bar to trim any excess flooring around the edges of the room.
Allow the adhesive to dry completely before walking on the flooring.

Tips for Installing Armstrong Glue Down Vinyl Plank Flooring:

Wear safety glasses and a dust mask when installing the flooring.
Make sure the subfloor is clean and dry before installing the flooring.
Apply a thin layer of adhesive to the subfloor using a trowel.
Place the first plank of flooring in the starting point and tap it into place using a rubber mallet.
Continue installing the planks, working your way out from the starting point.
Make sure to stagger the joints between the planks.
Once all of the planks are installed, use a pry bar to trim any excess flooring around the edges of the room.
Allow the adhesive to dry completely before walking on the flooring.

Conclusion:

Installing Armstrong glue down vinyl plank flooring is a relatively easy project that can be completed in a few hours. By following these simple instructions, you can install your new flooring quickly and easily.