How To Install Varidesk Dual Monitor Arm

How to Install a Varidesk Dual Monitor Arm

Upgrading your workspace with a Varidesk Dual Monitor Arm can significantly enhance your ergonomics and productivity. With this comprehensive guide, you'll learn how to install it effortlessly and enjoy its benefits.

Step 1: Prepare Your Workspace

Clear the area where you intend to install the arm. Gather all necessary tools: screwdrivers (Phillips and hex), wrench, and possibly a drill depending on the mounting surface.

Step 2: Choose the Mounting Option

Determine the mounting surface: desk clamp or grommet mount. If using a clamp, ensure the desk is thick enough (1.2" - 2.4") and has enough clearance. For grommet mounting, check for an available hole with a diameter of 2.25" - 3.5".

Step 3: Mount the Base

Locate the base plate and align it with the mounting surface. For clamp mounting, tighten the bolts using the hex wrench. For grommet mounting, pass the bolt through the hole and secure it with washers and a nut. Use the wrench to tighten firmly.

Step 4: Assemble the Arm

Connect the arm sections by aligning the holes and inserting bolts. Hand-tighten the bolts and then use the hex wrench to tighten them securely. Ensure the arm is upright and stable.

Step 5: Attach the Monitor Mounts

Take the monitor mounts and attach them to the ends of the arm. Adjust the height and angle of each mount according to your desired position. Use a screwdriver to secure the screws on the mounts.

Step 6: Mount the Monitors

Carefully lift your monitors and attach them to the mounts. Ensure they are securely fastened. Connect the cables to the monitors and route them through the cable management channels on the arm.

Step 7: Adjust and Calibrate

Once both monitors are installed, adjust the arm's height, angle, and tension to suit your preferences. Calibrate your monitors to ensure proper alignment and color accuracy.

Conclusion:

Installing a Varidesk Dual Monitor Arm is a straightforward process that can greatly improve your workplace ergonomics and productivity. Follow these steps carefully, and if you encounter any difficulties, refer to the manufacturer's instructions or consult a professional.