How To Remove A Broken Shower Arm

How to Remove a Broken Shower Arm

A broken shower arm can be a major inconvenience, but it's one that you can usually fix yourself with a few simple tools. In this article, we'll walk you through the steps on how to remove a broken shower arm so that you can get your shower back up and running in no time.

Tools You'll Need

Adjustable wrench
Allen wrench (if necessary)
Penetrating oil (optional)
Safety glasses

Safety First

Before you start, be sure to put on safety glasses to protect your eyes from flying debris. It's also a good idea to turn off the water supply to your shower to prevent any leaks.

Step-by-Step Instructions

Locate the set screw. Most shower arms are held in place by a set screw that is located on the back of the arm, near the wall. Use an Allen wrench to loosen the set screw.
Remove the shower arm. Once the set screw is loose, you should be able to pull the shower arm straight out of the wall. If the arm is stuck, you can try using a penetrating oil to loosen it up.
Clean the threads. Once the shower arm is removed, clean the threads on the arm and on the wall where the arm was attached. This will help to ensure a good seal when you install the new shower arm.
Install the new shower arm. Apply a small amount of sealant to the threads of the new shower arm, and then thread the arm into the wall. Tighten the arm until it is snug, but do not overtighten it.
Tighten the set screw. Once the shower arm is installed, tighten the set screw to hold it in place.

Troubleshooting

If you are having trouble removing a broken shower arm, there are a few things you can try:

Use a penetrating oil. If the shower arm is stuck, you can try using a penetrating oil to loosen it up. Apply the oil to the threads of the arm and let it sit for a few minutes before trying to remove the arm.
Use an adjustable wrench. If you are having trouble loosening the set screw, you can try using an adjustable wrench. Be careful not to overtighten the wrench, as this could damage the set screw.
Call a plumber. If you are unable to remove the broken shower arm yourself, you may need to call a plumber for assistance.

Conclusion

Removing a broken shower arm is a relatively easy task that can be completed in a few minutes. By following the steps outlined in this article, you can get your shower back up and running in no time.