How To Build A Farmhouse King Size Bed Frame

How to Build a Farmhouse King Size Bed Frame

Building a farmhouse king size bed frame is a great way to add a touch of rustic charm to your bedroom. It's also a relatively easy project that can be completed in a weekend. In this article, we'll walk you through the essential steps of building a farmhouse king size bed frame.

Materials You'll Need:

4 - 4x4 posts (8 feet long)

4 - 2x6 boards (8 feet long)

10 - 2x4 boards (8 feet long)

1 - sheet of 3/4-inch plywood (4 feet by 8 feet)

Wood screws

Wood glue

Sandpaper

Stain or paint (optional)

Tools You'll Need:

Circular saw

Drill

Screwdriver

Hammer.

Level

Measuring tape

Clamps

Instructions:

1. Cut the 4x4 posts to length. The posts will be the legs of the bed frame. Cut them to the desired height of the bed frame, which is typically between 18 and 24 inches.

2. Cut the 2x6 boards to length. The 2x6 boards will be the side rails of the bed frame. Cut them to the length of the bed frame, which is typically 76 inches for a king size bed.

3. Cut the 2x4 boards to length. The 2x4 boards will be the cross members of the bed frame. Cut them to the width of the bed frame, which is typically 80 inches for a king size bed.

4. Assemble the side rails. Place two of the 2x6 boards parallel to each other, with the ends flush. Apply wood glue to the ends of the boards and clamp them together. Drill two pilot holes through the boards and into the ends of the 4x4 posts. Drive wood screws through the pilot holes to secure the legs to the side rails.

5. Attach the cross members. Place the remaining 2x4 boards perpendicular to the side rails, spacing them evenly apart. Apply wood glue to the ends of the boards and clamp them together. Drill two pilot holes through the boards and into the side rails. Drive wood screws through the pilot holes to secure the cross members to the side rails.

6. Attach the plywood. Place the sheet of plywood on top of the cross members. Apply wood glue to the top of the plywood and clamp it in place. Drill pilot holes through the plywood and into the cross members. Drive wood screws through the pilot holes to secure the plywood to the cross members.

7. Sand and finish the bed frame. Once the bed frame is assembled, sand it smooth. You can then stain or paint the bed frame to match your décor.