How To Install Tv Wall Mount With Arm

How to Install a TV Wall Mount with Arm

Mounting your TV on the wall not only saves floor space but also enhances the aesthetics of your living room or entertainment area. If you're looking to install a TV wall mount with an arm, follow these step-by-step instructions for a secure and professional-looking installation.

Materials Required:

TV wall mount with arm
Drill
Screwdriver
Stud finder (optional but highly recommended)
Level
Screws and bolts (typically included with the mount)

Step 1: Determine the Wall Type

Before you start drilling, it's crucial to determine the type of wall you have. Whether it's drywall, concrete, or brick, each material requires different mounting techniques and fasteners.

Step 2: Locate the Studs

For drywall walls, it's essential to locate the wall studs for secure mounting. Use a stud finder to locate the studs behind the drywall and mark their positions with a pencil.

Step 3: Mark the Mount Location

Use the template provided with the mount to mark the mounting holes on the wall. Ensure that the mount is placed at the desired height and centered as per your preference.

Step 4: Drill Pilot Holes

Drill pilot holes at the marked locations using a drill bit slightly smaller than the provided screws. This will make it easier to screw in the bolts without cracking the drywall.

Step 5: Mount the Base Plate

Align the base plate of the wall mount with the pilot holes and secure it using the provided screws. Use a screwdriver or wrench to tighten the screws securely.

Step 6: Assemble the Arm

Following the manufacturer's instructions, assemble the arm components that will connect the TV to the base plate. This usually involves inserting the arm into the base plate and securing it with bolts.

Step 7: Mount the Arm to the TV

Attach the mounting brackets or adapters to the back of the TV as per the TV manufacturer's guidelines. Then, align the TV with the arm and slide it onto the mounting brackets.

Step 8: Adjust the Arm and Level the TV

Extend or retract the arm as needed to achieve the desired viewing distance and tilt the TV to the optimal angle. Use a level to ensure that the TV is mounted straight.

Step 9: Conceal the Wires (Optional)

If desired, you can hide the unsightly wires by running them through a cable management system or conduit. This will give your installation a clean and professional look.

Step 10: Final Inspection

Once everything is in place, perform a final inspection to ensure that the TV is securely mounted and all wires are connected properly. Enjoy your newly wall-mounted TV!

14 Durable Tv Wall Mounts For Longest Extension 2024

Swivel Tilt Rotate Wall Mount For 37 To 50 Tvs And Monitors Eaton

Getuscart Perlesmith Tv Wall Mount Bracket Full Motion Single Articulating Arm For Most 32 55 Inch Led Lcd Oled Flat Curved Tvs With Tilt Swivel And Rotation Up To 77lbs Vesa 400x400mm